Industry
Tankers & bulk haulers
Round tank bodies and wide rear ends, with clearance and identification lighting doing most of the work.
What this class needs
- Wide rear profiles push the build into the over-80" rule set — I6 identification and side clearance.
- Marker and mid-turn lamps on the barrel are what outline the vehicle at night.
- Sealed IP67 construction matters here: these bodies get washed down hard.
Where FMVSS 108 lands here
Requirements change with width and length. Under 80 inches, a combination kit typically covers stop, turn, tail, marker and plate. At 80 inches and wider, the three-lamp identification bar and intermediate side markers come into play — and that is usually where a build runs into trouble.
Specified for this class
Parts that fit
Stop / Turn / Tail
6" Oval Stop / Turn / Tail Light
- Part number
- 2060118
- Functions
- S T I
- Light source
- 10-LED, PMMA lens / ABS housing
- Voltage / current
- 13.5 VDC · tail 0.02 A / stop 0.17 A
Stop / Turn / Tail
4" Round Stop / Turn / Tail Light
- Part number
- 2060312
- Functions
- S T I
- Light source
- 10-LED, PMMA lens / ABS housing
- Voltage / current
- 13.5 VDC · tail 0.02 A / stop 0.17 A
Stop / Turn / Tail
17" Trailer Light Bar
- Part number
- 2060602
- Functions
- S T I mounted vertically · U2 mounted horizontally
- Light source
- 13-LED thinline
- Mounting
- Stud mount, hardwired
Stop / Turn / Tail
6" Mid-Turn Signal / Marker Light
- Part number
- 2060210
- Functions
- A E P2
- Light source
- LED, PMMA lens / ABS housing
- Voltage / current
- 13.5 VDC · marker 0.03 A / turn 0.30 A
Quote this build
Send us the trailer, not the part number
Type, width, functions and annual volume are enough for us to come back with part numbers and pricing.