Series S1
Combination Kits
Complete rear-lighting kits for trailers under and over 80 inches wide — two combination lamps, amber markers, plate bracket, Y-harness and hardware in one part number.
Selection table
5 parts in this series
Same series, different body or function. Compare the row you need, then open the part for dimensions, photometry and packing.
| P/N | Part | Functions | IP |
|---|---|---|---|
| 2060003 | 4" Low-Profile Combination Kit — Under 80" | Lamp: S T I · red side marker · L (plate) Clearance: A · P2 | IP67 |
| 2060114 | 8" Low-Profile Kit — Over 80" | Stop / turn / tail · side marker · license lamp (left side) | IP67 |
| 2061900 | 2PK 6" & 2" Trailer Light Box Kit | S T I (6" oval) · P2 marker (2" round) | IP67 |
| 2060009 | 2PK Trailer Guide Post Light | S T I | IP67 |
| 2060106 | 4" Combination Trailer Light Kit — Under 80" Application | Stop / Turn / Tail / License / Marker / Clearance / Reflex | IP67 |
Combination Kits
4" Low-Profile Combination Kit — Under 80"
- Part number
- 2060003
- Functions
- Lamp: S T I · red side marker · L (plate)
Clearance: A · P2 - Voltage
- 12 VDC
- Dimensions
- Lamp 5" × 4.9" × 2" deep (2.9" tall with plate light)
Clearance lamp 4" × 2.4" × 1" - Wiring
- 25 ft 4-flat harness · colour coded · ring terminal on ground
- Lens / housing
- Acrylic lens / ABS housing
- Ingress protection
- IP67
- Suited to
- Trailers and towing vehicles under 80" wide
- Packing
- 1 / 12 · 16.5" × 12.5" × 8.5" · 15.5 lb
Combination Kits
8" Low-Profile Kit — Over 80"
- Part number
- 2060114
- Functions
- Stop / turn / tail · side marker · license lamp (left side)
- Light source
- 11 red + 2 white LEDs · ABS housing / acrylic lens
- Dimensions
- 8" × 3" × 2.8" per housing · 4" bolt centres
- Wiring
- 25 ft harness, 4-flat plug · white + brown low / white + yellow-green high
- Mounting
- 2 bolts at 4" centres per housing
- Voltage
- 12V DC system · 13.5 VDC
- Suited to
- Trailers over 80" wide
- Ingress protection
- IP67
Combination Kits
2PK 6" & 2" Trailer Light Box Kit
- Part number
- 2061900
- Functions
- S T I (6" oval) · P2 marker (2" round)
- Light source
- LED · ABS housing / acrylic lens
- Steel box
- 8-3/4" × 4" × 3-3/4" · 14GA (2.0 mm) welded steel
- 6" oval lamp
- 6-13/32" × 3-1/4" · 1-3/4" deep · 7.6" 3-prong pigtail
- 2" round lamp
- 2-13/16" bezel · 2" lens · 15/16" deep · 7.6" 2-prong pigtail
- Finish
- Bare steel, no paint coating — ready to paint after fitting
- Voltage
- 12V DC system · 13.5 VDC
- Ingress protection
- IP67
- Packing
- 1 / 6 · 24.5" × 10.5" × 11.5" · 45.5 lb
Combination Kits
2PK Trailer Guide Post Light
- Part number
- 2060009
- Functions
- S T I
- Voltage / current
- 13.5 VDC · tail 0.01 A / stop 0.17 A
- Dimensions
- 11" tall × 2-3/4" wide · lamp 6-3/8"
- Wiring
- White ground, black tail, red stop/turn
- Wire length
- 25 ft
- Ingress protection
- IP67
- Packing
- 1 / 10 · 18" × 13" × 15.5" · 33 lb
Combination Kits
4" Combination Trailer Light Kit — Under 80" Application
- Part number
- 2060106
- Functions
- Stop / Turn / Tail / License / Marker / Clearance / Reflex
- Light source
- 13 LED (11 red + 2 white) · PMMA lens / ABS housing
- Lens color
- Red / Amber / Clear
- Light color
- Red / Amber / White
- Voltage / current
- 13.5 VDC · tail 0.06A, stop 0.29A, amber marker .009A
- Reflex reflector
- Integral, moulded into the lens
- Lens marking
- FMVSS S T I A, A P2, L
- Ingress protection
- IP67
- Weight
- 2.87 lb
- Packing
- Inner / master 1 / 12
- Master carton
- 21"x17"x14"
- Gross weight
- 36.4 lb
- Lamp size
- 4-3/4" x 4-3/4" x 1-1/2" deep (120 x 120 x 38 mm)
- Mounting
- 2" (51 mm) between holes, surface mount
Other series
Keep looking
Full specification
Dimensional drawings and photometric plots
Every part in this series is documented in the 2026 catalog with candela distribution plots and packing data.