4" Combination Trailer Light Kit — Under 80" Application

Description

A 4-3/4 inch square lamp that covers the whole rear corner on its own: 10 red LEDs for stop, turn and tail, 2 white LEDs for the license plate and 1 red LED in the side lens for the marker. 13 LEDs in total, 11 red and 2 white.

Everything needed to wire the rear of the trailer ships in the box — a 22 ft split Y-style harness, a 4 ft colour-coded trunk harness, a license plate bracket, wire splicers, terminals, frame clips and screws.

The body is 1-1/2 inches deep and bolts straight to the frame on 2 inch centres, so a flat or boxed mounting surface is all it needs. It ships as a pair with the connectors and terminals shown in the photographs; the harness and plate bracket that complete the kit are listed under what ships in the box.

• 1 LED side marker, 2 LED license light and 10 stop/turn/tail LEDs in one 4 in square body
• 13 LEDs per lamp — 11 red plus 2 white
• Two brightness levels: white + brown for tail, running and plate; white + yellow-green for stop and turn
• Sonically sealed PMMA lens on an ABS housing, rated IP67
• Bolt-on surface mount, 2 in between the holes, for trailers under 80 in wide

Specification

What ships in the box

• 1 × driver-side 4" combination lamp
• 1 × passenger-side 4" combination lamp
• 2 × amber marker lamps
• 1 × license plate bracket
• 1 × 22 ft split Y-style harness
• 1 × 4 ft colour-coded trunk harness
• 6 × wire splicers · 6 × wire terminals · 6 × frame clips · 4 × screws