Harness & Hardware
4" Combination Tail Light Mounting Box — Driver Side
Bare steel box that takes a 4 inch combination tail lamp on the driver side, welded to the frame.
Part number 2060931
Bare steel box that takes a 4 inch combination tail lamp on the driver side, welded to the frame.
- PlantJiangmen, Guangdong, China
- Quality systemISO 9001:2015
- Inspection100% in line
Description
A simple open-backed steel cradle for a 4 inch combination tail lamp, cut for the driver side so the lamp sits square to the rear panel. Welds directly to the frame and protects the back of the lamp from load and road debris.
Supplied bare, no surface treatment, 2 mm steel. Pairs with 2060932 for the passenger side.
- Pre-cut for a standard 4 inch combination lamp
- Driver side, pairs with 2060932
- 2 mm bare steel, welded and finished with the frame
- Open back keeps the lamp serviceable
Specification
| Part number | 2060931 |
|---|---|
| Material | Steel, 2 mm, bare — no surface treatment |
| Installation | Weld on |
| Fits | 4" combination tail light, driver side |
| Dimensions | 5.3" × 5.3" × 3" · thickness 0.08" |
| Pallet | 784 pcs · 43" × 43" × 43" · 1250 lb |
| Finish | Bare steel, paint or powder coat after welding |
What ships in the box
- 1 × welded steel mounting box, driver side, bare finish
Related parts
Often specified together
Harness & Hardware
License Plate Bracket
- Material
- Steel, powder-coated
- Supplied with
- Combination and low-profile kits
- Availability
- Also sold as a service part
Harness & Hardware
Split Y-Style Harness
- Length
- 22 ft split Y, plus 4 ft trunk harness
- Termination
- Colour-coded, 4-pin flat
- Included hardware
- 6 wire splicers, 6 terminals, 6 frame clips, 4 screws
- Supplied with
- Under-80" and over-80" kits
Harness & Hardware
PL-3 Plug & Grommets
- PL-3 plug
- P/N 20001001
- 6" oval grommet
- P/N 10003017
- 4" round grommet
- P/N 10003012
- 2" grommet
- P/N 10003013