Harness & Hardware
6" Oval & 2" Round Trailer Light Box — Angled
The same 6 inch oval and 2 inch round steel box, angled so the lamps face out and back on a tapered rear panel.
Part number 2060933
The same 6 inch oval and 2 inch round steel box, angled so the lamps face out and back on a tapered rear panel.
- PlantJiangmen, Guangdong, China
- Quality systemISO 9001:2015
- Inspection100% in line
Description
Built for rear panels that are not flat. The box angles the lamp face outward as well as rearward, so the tail lamp is still visible from the side of the trailer and the marker still reads at the corner.
Same construction as the straight box: 14 gauge bare steel, pre-cut 6 inch oval and 2 inch round holes, 0.65 inch lid. Welds on and gets finished with the frame.
- Angled face keeps the tail lamp visible from the side
- Pre-cut 6 inch oval and 2 inch round holes
- 0.65 inch lid protects the lenses
- Bare steel, welded and finished on the line
Specification
| Part number | 2060933 |
|---|---|
| Material | Steel, bare — no surface treatment |
| Installation | Weld on |
| Cutouts | 6" oval grommet mount · 2" round grommet mount |
| Dimensions | 4" × 9.8" × 6.7" · lid lip 0.7" |
| Pallet | 600 pcs · 43" × 40" × 40" · 1852 lb |
| Finish | Bare steel, paint or powder coat after welding |
What ships in the box
- 1 × angled welded steel light box, bare finish
Related parts
Often specified together
Harness & Hardware
License Plate Bracket
- Material
- Steel, powder-coated
- Supplied with
- Combination and low-profile kits
- Availability
- Also sold as a service part
Harness & Hardware
Split Y-Style Harness
- Length
- 22 ft split Y, plus 4 ft trunk harness
- Termination
- Colour-coded, 4-pin flat
- Included hardware
- 6 wire splicers, 6 terminals, 6 frame clips, 4 screws
- Supplied with
- Under-80" and over-80" kits
Harness & Hardware
PL-3 Plug & Grommets
- PL-3 plug
- P/N 20001001
- 6" oval grommet
- P/N 10003017
- 4" round grommet
- P/N 10003012
- 2" grommet
- P/N 10003013